-
alumminum die casting process typically has five steps, which are listed.
Jul 02 , 2020
1. the two halves of the die mold are first cleaned to remove any residue from the last injection. Then, each half is lubricated to facilitate ejection from the mold later on in the process. after lubrication, the two halves of the die are properly clamped together. sufficient force is needed to keep the two dies securely clamped together. The time needed to close and the clamp will increase with ...
Đọc thêm
-
Quy trình cắt và hàn hồ sơ nhôm
Nov 29 , 2023
1. Cách cắt profile nhôm Cắt nhôm định hình thường cần có máy cắt nhôm chuyên nghiệp, nếu không sẽ gây ra những rắc rối như mặt cắt thô và kích thước không chính xác. Đầu tiên bôi dầu bôi trơn lên máy cắt hoặc profile nhôm, sau đó cắt trực tiếp bằng máy. Nếu cần cắt một góc đặc biệt, bạn có thể sử dụng máy CNC để cắt. 2. Phương pháp hàn hồ sơ hợp kim nhôm Hàn khí: Tay phải cầm mỏ hàn, đặt ngón cái...
Đọc thêm